Oil mist Collector BM/BV

Designed specifically for the filtration of coolants, oil mist from Today's modern machine tools.
BM Type - Ducted style BV Type -  Direct Mount style Oil Mist Collector Oil Mist Collector
FEATURES
	● Clean the Air ● Machine Fluid Savings ● Most of Oil is separated, not filtered ● Reduced Mist Exposure ● No expensive filters to replace ● Reduces Housekeeping Costs ● Easy installation & maintenance ● Compact and light weight.
APPLICATIONS
	►CNC Lathe, NC Processing, Spray coating machine, Tapping machine, Machine Center, Homing Machine

HOW THE OIL MIST IS COLLECTED
	1. Pre-separation
	The oil mist is sucked away from the tooling area of the machining tool through the 4 inch intake. The primary "stainless pleated cartridge" separates most of the oil mist and provides exceptional gravity drainage. The bulk of the oil is quickly removed out of the air flow and to be drained back to the machine tool through the 4 inch intake (BV type) or the 1/2 inch oil pipe drain (BM type).
	2. Centrifugal
	In the intermediate blower, a vortex is created by the fan rotation causing a formation of large oil drops which will easily be separate on the side plenum. Because of the gravitation, the large oil drops will again flow back to the machine tool through (another) 1/2 inch oil pipe drain located at the bottom of the side plenum.
	3.Final Filtration
	The cleaned air is sucked by the blower and blown out through the "non-woven filter fabrics" towards the top of the unit.

TANDARD ACCESSORIES
	BM type		BV type
	● Stainless pleated filter cartridge ● Non-woven Filter Fabric (10 Pcs) ● Flanged External Connector     (to be bolted to the machine enclosure) ● Strainer for the External Connector ● Transparent PVC hose ( I.D.:1/2 inch) ● 90 ºC Elbow (2 Pcs) ● Flexible Duct ● Duct Clamp (4 Pcs) ● Hardware		● Stainless pleated filter cartridge ● Non-woven Filter Fabric (10 Pcs) ● Flanged Inlet Collar ● Strainer for the Inlet Collar ● Transparent PVC hose ( I.D.:1/2 inch) ● Hardware

CONSTRUCTIONS  STRUCTION
	NAME of PART			MATERIAL
	Blower Casing			Aluminum Casting
	Impeller			Aluminum Casting
	Inlet Plenum			Aluminum Casting
	Side Plenum			Aluminum Casting
	Oil Seal
	Motor Casing			Steel          (1/2 HP) Aluminum (1, 2 HP)
	Fan Cover			steel
	Terminal Box			Steel
	Capacitor			Only in Single Phase
	Bearing			Ball Bearing
FILTRATION ELEMENT
Stainless Pleated cartridge (Washable) Non-woven filter fabrics (Washable)

● BM Type - Ducted Style Oil Mist Collectors  ● BV Type - Direct Mount Style Oil Mist Collectors * Motor - TEFC,  IP54 Grade F Insulation * Permitted maximum ambient temperature is 40ºC
50HZ SPECIFICATIONS
TYPE MOTOR BORE (SUCTION) Maximum PRESSURE Maximum CAPACITY Noise L X W X H Weight BM BV HP kW PH V inch mm mmAq m3/min dB mm kG BM-0532 BV-0532 1/2 0.37 3 220~440 4" 100 130 6.3 50 570 x 380 x580 28 BM-132 BV-132 1 0.75 3 220~440 4" 100 210 15.7 62 640 x 435 x 605 38 BM-232 BV232 2 1.5 3 220~440 4" 100 238 18.3 72 720 x 520 x 615 43
PERFORMANCE CURVES